Timing settings on scanning

CAUTION:
Start by specifying the scan method! The timing that can be set, depends on the specified scanning method. See The scanning method settings.
  1. Choose Tools > Scanning selection....
  2. Choose the Timing tab.
  3. As required, select one of the following options:
    Option Explanation
    Advance time If scanning has been specified to continue automatically, you can change the period of time between scanning one cell/row/column and the next cell/row/column.
    Backward step time If the Backtrack option has been specified on the Method tab, you can change the Backward step time, the period of time between scanning one cell/row/column and the next cell/row/column.
    Wait after group selection You can change the period of time after which scanning continues after selecting a row, column or group.
    Post selection time After a selection, all input from the selection switch is ignored for this period of time.
    Hold time You can change the length of time you need to tap and hold the switch before the selection is performed.
    Auto select time Once the Automatic (after timeout) option has been configured in the Method tab, you can change the period of time for automatic selection.
    Post advance time After a step, all input from the step switch is ignored for this period of time. You can use this to avoid quick unintentional successive steps.
  4. Do one of the following:
    • Click on to decrease the time, click on to increase the time.
    • Drag the slider to the left to decrease the time, drag it to the right to increase the time.
  5. Click OK.