Settings for selecting by pressing switch 2 on scanning selection

Selecting by pressing switch 2 on scanning, can only be enabled with the following step methods:
  • As long as you press and hold switch 1
  • If you press switch 1
Some options only become visible when you choose one of the following step patterns:
  • Row-column
  • Column-row
  1. Choose Menu > Settings.
  2. Choose Access.
  3. Choose Scanning.
  4. In the Select options group, choose Access method, If you press switch 2 from the drop-down list.
  5. Set the following options:
    OptionProcedure
    Invert switch 1 (mover) and switch 2 (selector) while scanning You move between items with switch 1. You then select the group/row/column with switch 2 and after that continue to advance using switch 2. Then select using switch 1, etc.
    This option is only can only be enabled if the following 2 conditions are met:
    • In the Scanning options group, in Scanning pattern from the Pattern drop-down list, select Row-column or Column-row.
    • In Scanning settings select If you press switch 1 from the Access method drop-down list.

    Choose Yes to enable this option.

    Perform action From the drop-down list, select one of the following options:
    • When pressing: the selection is made when the switch is pressed. You can also set the Acceptance time (choose for more info) by dragging the slider or by fine-tuning with and .
    • When releasing: the selection is made when the switch is released.
    Scan the entire row/column/group after advancing through the row/column/group. After you have advanced through the row, column or group, it will be completely marked before you can continue.
    Use mouse while scanning This allows an instructor to select cells with the mouse while scanning.

    Choose Yes to enable this option.

    Return to beginning After the selection, scanning starts again at the first cell or series of cells.

    Choose Yes to enable this option.

    Delay time after selection After a selection, all input from switch 2 (selector) is ignored for a set period of time. This option prevents a user from activating involuntary multiple selections.

    Drag the slider to set the delay time after selection. You can fine-tune the delay time after selection with and .

  6. Choose OK.